28-338-Polyester TMT FDY Lines

  • Description

Description

28-338-Polyester TMT FDY Lines

Specification of TMT Polyester FDY Lines

I. 32 ends. 270 pos (30×9) pos. 3GR+1SR. chuck length:1500mm. YOM:2010.

1).
(1) 50-75D. 60pos (30×2) pos. stop in 2020.
(2) Pitch: 1550mm.
(3) Three/two pos per beam by Chongli.
(4) Melt pump: 1.6ccx16.
(5) Oil nozzle.
(6) Finish pump:0.05cc.
(7) Spin pack: Round.
(8) Spinneret(DIO): Ø88mm (Single).
(9) Cross quenching(H110x179).
(10) Winder Model: Ati-II615MR. YOM 2010.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle: Ø1.4×1 hole. Migration position above GR1.
(13) Intermingling: under GR2. Heberlein: HN112A

2).
(1) 50-75D. 30pos (30×1) pos. stop in 2020.
(2) Pitch: 1890mm.
(3) One pos per beam by Hongan.
(4) Melt pump: 1.6ccx16.
(5) Oil nozzle.
(6) Finish pump:0.05cc.
(7) Spin pack: Round.
(8) Spinneret(DIO): Ø88mm.
(9) Radial quenching(RD88).
(10) Winder Model:Ati-II615MR. YOM 2010.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle: Ø1.4×1 hole. Migration position above GR1.
(13) Intermingling: under GR2. Heberlein: HN112A

3)
(1) 50-75D. 180pos (30×6) pos. stop in 2020.
(2) Pitch: 1890mm.
(3) One pos per beam by Hongan.
(4) Melt pump:1.6ccx16 (36 pos with 1.2×16 and 1.6×16. all others are 1.6×16).
(5) Oil nozzle.
(6) Finish pump:0.05cc.
(7) Spin pack: Round.
(8) Spinneret(DIO): Ø88mm.
(9) Radial quenching(RD88).
(10) Winder model: Winder Model:Ati-II615MR. YOM 2010.
(11) Speed:2500-5500mpm.
(12) Migration nozzle: Ø1.4×1 hole. Migration position above GR1.
(13) Intermingling: under GR2. Heberlein: HN112A

24 ends. 342pos (30×2+36+30+36×2+36×4) pos. chuck length: 1380mm.3GR+1SR.
YOM: 2010 and 2012.

1).
(1) 75-150D. 60pos (30×2) pos. stop in 2020.
(2) Pitch: 1550mm.
(3) Three/two pos per beam by Chongli.
(4) Melt pump: 2.4ccx12.
(5) Oil nozzle.
(6) Finish pump:0.08cc.
(7) Spin pack: Round.
(8) Spinneret(Single):Ø95mm.
(9) Radial quenching(Ø95×165).
(10) Winder Model:Ati-II614MR. YOM 2010.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle: Ø1.4×1 hole. Migration position above GR1.
(13) Intermingling: under GR2. Heberlein: HN133A

2).
(1) 75~100D. 36 pos. stop: 2020.
(2) Pitch: 1550mm.
(3) Two pos per beam by TMT.
(4) Melt pump: 2.4×12.
(5) Oil nozzle.
(6) Finish pump: 0.1cc.
(7) Spin pack: Round.
(8) Spinneret (DIO): 105mm.
(9) Radial quenching(RD99x180).
(10) Winder Model:Ati-II614MR.YOM 2012.
(11) Speed: 2500-5500.
(12) Migration nozzle: Ø1.4×1 hole. Migration position above GR1.
(13) Intermingling: under GR2. Heberlein: HN133A

3).
(1) 100~200D. 30 pos. stop: 2020.
(2) Pitch: 1850mm.
(3) Three/two pos per beam by TMT.
(4) Melt pump: 3.0×12.
(5) Oil nozzle and Roller.
(6) Finish pump:0.2cc.
(7) Spin pack: Round.
(8) Spinneret (DIO): 105mm.
(9) Cross quenching (H140x171).
(10) Winder Model:Ati-II614MR.YOM 2012.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle above GR1: Ø1.4×1 hole.
(13) Intermingling: under GR2.Heberlein: HN163A

4).
(1) 75-150D. 72pos (36×2) pos. stop in 2020.
(2) Pitch: 1550mm.
(3) Two pos per beam by TMT.
(4) Melt pump: 2.4ccx12.
(5) Finish pump:0.2cc.
(6) Oil nozzle.
(7) Spin pack: Round.
(8) Spinneret(DIO):Ø105mm.
(9) Radial quenching(RD99x180).
(10) Winder Model:Ati-II614MR. YOM 2012.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle above GR1: Ø1.4×1 hole.
(13) Intermingling: under GR2.Heberlein: HN163A

5).
(1) 50-75D. 144pos (36×4) pos. stop in 2020.
(2) Pitch: 1550mm.
(3) Two pos per beam by TMT.
(4) Melt pump:1.6ccx12.
(5) Finish pump:0.1cc.
(6) Oil nozzle.
(7) Spin pack: Round.
(8) Spinneret(DIO): Ø85mm.
(9) Radial quenching(RD80x180).
(10) Winder Model:Ati-II614MR. YOM 2012.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle above GR1: Ø1.4×1 hole.
(13) Intermingling: under GR2.Heberlein: HN112A

II. 20 ends. 280pos (24×4+24+10+12+36+30+36×2) pos. 3GR+1SR. chuck length:1500mm
YOM: 2004,2006,2007,2012.

1).
(1) 50-75D. 96pos (24×4) pos. chips spinning. stop in 2018.
(2) Pitch: 1380mm.
(3) Six pos per beam by Dalian.
(4) Melt pump:1.6ccx10.1.2×10.
(5) Oil nozzle and Roller.
(6) Finish pump:0.08cc.
(7) Spin pack: rectangular.
(8) Spinneret(single): Ø55mm.
(9) Cross quenching(H134x128.5).
(10) Winder Model:Ati-615C16 (66 sets). YOM 2004.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein

2).
(1) 50-75D. 24pos (24×1) pos. chips spinning. stop in 2018.
(2) Pitch: 1380mm.
(3) Six pos per beam by Dalian.
(4) Melt pump:1.6×10.1.2×10.
(5) Oil nozzle and Roller.
(6) Finish pump:0.08cc.
(7) Spin pack: rectangular.
(8) Spinneret(single):Ø55mm.
(9) Cross quenching(H134x128.5).
(10) Winder Model:Ati-615C16. YOM 2004.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein

3).
(1) 50-75D. 22pos (12+10) pos. chips spinning. with extruder. stop in 2018.
(2) Pitch: 1420mm.
(3) Six pos per beam by Dalian.
(4) Melt pump:1.2×10.
(5) Oil nozzle and Roller.
(6) Finish pump:0.08cc.
(7) Spin pack: Rectangular.
(8) Spinneret(single):Ø55mm.
(9) Cross quenching(H133x135).
(10) Winder Model:Ati-615C20. YOM 2006.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein

4).
(1) 50-75D. 72pos (36×2) pos. Direct spinning. stop in 2020.
(2) Pitch: 1420mm.
(3) Six pos per beam by Hongan.
(4) Melt pump:1.6×10.
(5) Oil nozzle and Roller.
(6) Finish pump:0.08cc.
(7) Spin pack: Round.
(8) Spinneret(DIO):Ø88mm.
(9) Radial quenching(RD88).
(10) Winder Model:Ati-II612MR. YOM 2007.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein

5).
(1) 200-300D. 30pos (30×1) pos. Direct spinning. stop in 2020.
(2) Pitch: 1750mm.
(3) Two/three pos per beam by TMT.
(4) Melt pump:4.5×10.
(5) Oil nozzle and Roller.
(6) Finish pump:0.3cc.
(7) Spin pack: Round.
(8) Spinneret(DIO):Ø120mm.
(9) Cross quenching(H140x161).
(10) Winder Model: Ati-II615MR. YOM2012.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.8×1 hole.
(13) Intermingling under GR2.Heberlein HN202A.

6).
(1) 40-50D. 72pos (36×2) pos. Direct spinning. stop in 2020.
(2) Pitch: 1420mm.
(3) Two pos per beam by Hongan.
(4) Melt pump:1.2×10.
(5) Oil nozzle.
(6) Finish pump:0.08cc.
(7) Spin pack: Round.
(8) Spinneret(DIO):Ø88mm.
(9) Radial quenching(RD88).
(10) Winder Model:Ati-615C. YOM 2007.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle above GR1: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein HN112A.

III. 16 ends. 32pos (30+2) pos. YOM 2004 and 2006,3GR+1SR, Chuck length:1500mm

1).
(1) 50-75D. 2pos. Chips spinning. stop in 2018.
(2) Pitch: 1350mm.
(3) Two pos per beam by Dalian.
(4) Melt pump:1.6×8/1.6×8.
(5) Oil nozzle.
(6) Finish pump:0.08cc.
(7) Spin pack: Rectangular.
(8) Spinneret(Single):Ø115mm.
(9) Cross quenching(H132.5×128.5).
(10) Winder Model:Ati-615C20. YOM 2006.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein.

2).
(1) 100-200D. 30pos. Direct spinning. stop in 2020.
(2) Pitch: 1550mm.
(3) Three/two pos per beam by Chongli.
(4) Melt pump:1.6×16.
(5) Oil nozzle.
(6) Finish pump:0.08cc.
(7) Spin pack: Round.
(8) Spinneret(DIO):Ø88mm.
(9) Cross quenching(H110x179).
(10) Winder Model:Ati-615C. YOM 2004.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.

IV. 12 ends. 72pos (6+6+12+7+7+12) pos. YOM 2004,3GR+1SR,Chuck length: 1380mm

1).
(1) 75-150D. 6pos. Chips spinning. stop in 2020.
(2) Pitch: 1330mm.
(3) Six pos per beam by Dalian.
(4) Melt pump:1.6×6.
(5)Oil nozzle.
(6) Finish pump:0.08cc.
(7) Spin pack: Rectangular.
(8) Spinneret(Single):Ø85mm.
(9) Cross quenching(H134x118).
(10) Winder Model:Ati-614R12. YOM 2004.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein.

2).
(1) 50-75D. 6pos. Chips spinning. stop in 2020.
(2) Pitch: 1330mm.
(3) Six pos per beam by Dalian.
(4) Melt pump:3.0×6.
(5) Oil nozzle.
(6) Finish pump:0.08cc.
(7) Spin pack: Rectangular.
(8) Spinneret(Single):Ø85mm.
(9) Cross quenching(H134x118).
(10) Winder Model:Ati-614R12. YOM 2004.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein.

3).
(1) 100-200D. 12pos. Chips spinning. stop in 2020.
(2) Pitch: 1330mm.
(3) 6 pos per beam by Dalian.
(4) Melt pump: 2.4×6.
(5) Oil nozzle.
(6) Finish pump:0.08cc.
(7) Spin pack: Rectangular.
(8) Spinneret(Single):Ø85mm.
(9) Cross quenching(H134x118).
(10) Winder Model:Ati-614R12. YOM 2004.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein.

4).
(1) 50-75D. 14pos(7×2). Chips spinning. stop in 2020.
(2) Pitch: 1330mm.
(3) Seven pos per beam by Dalian.
(4) Melt pump:3.0×6/1.6×6.
(5) Oil nozzle/Roller.
(6) Finish pump:0.08cc.
(7) Spin pack: Rectangular.
(8) Spinneret(split):Ø115mm.
(9) Cross quenching(H132.5×100).
(10) Winder Model:Ati-614R12. YOM 2004.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein.

5).
(1) 50-75D. 12pos. Chips spinning. stop in 2018.
(2) Pitch: 1400mm.
(3) Six pos per beam by Dalian.
(4) Melt pump:3.0×6/1.6×6.
(5) Oil nozzle/Roller.
(6) Finish pump:0.08cc.
(7) Spin pack: Rectangular.
(8) Spinneret(single):Ø80mm.
(9) Cross quenching(H134x130).
(10) Winder Model:Ati-614R12. YOM 2004.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle under GR2: Ø1.4×1 hole.
(13) Intermingling under GR2.Heberlein.

V. 10 ends POY. 60pos (30×2) pos. YOM 2010, chuck length:1500mm
(1) 50-150D. 60pos. Direct spinning. stop in 2019.
(2) Pitch: 900/950mm.
(3) Ten pos per beam by Chongli.
(4) Melt pump:1.6×10/2.4×10.
(5) Oil nozzle.
(6) Finish pump:0.06cc.
(7) Spin pack: Round.
(8) Spinneret(Single):Ø85/95mm.
(9) Radial quenching(Ø85×165/Ø95×165).
(10) Winder Model: BWA40T-1500. YOM 2010.
(11) Speed: 2500-3500mpm.

VI. Notice:
72 pos brand new. 24 ends. 3GR+1SR, YOM 2016, chuck length: 1380mm. Have to pay tariff and
other costs to customs if they are exported.
(1) 50-75D. 72pos (36×2) pos. brand new. not run after installation.
(2) Pitch: 1550mm.
(3) Two pos per beam by Hongan.
(4) Melt pump:2.4ccx12.
(5) Oil nozzle.
(6) Finish pump:0.1cc.
(7) Spin pack: Round.
(8) Spinneret(DIO): Ø88mm.
(9) Radial quenching(RD88).
(10) Winder Model:Ati-II614MR. YOM 2016.
(11) Speed: 2500-5500mpm.
(12) Migration nozzle: Ø1.4×1 hole. Migration position above GR1.
(13) Intermingling: under GR2. Heberlein: HN112A

VI
(1) 15 sets of Dryers, 30kg/hr,500 kg/hr,600 kg/hr,800 kg/hr,1000 kg/hr,1200 kg/hr,1300 kg/hr
(2) 20 sets of extruders, Dia.Ø65, Ø80, Ø105, Ø120, Ø135, Ø150, Ø160.

Print Friendly, PDF & Email
You've just added this product to the cart: